The resin process also known as the drip process refers to the droplets of the resin on the work, and the jewelry required for daily desired is reached by natural air drying. Today, sharing is the ocean-style pendant earringe jewelry, and the article details the production methods and precautions encountered during the production process of marine style earrings.
The material needs to be required:
Epoxy resin, jewelry line, earrings accessories, shell, pearl mother, crab claw, seaweed, natural pearl,
Everyone who has been to the seaside will come to Shanghai’s various colorful shells, and they will be placed at home as a decoration. If you are not far from the sea, then you have to congratulations, you have a unique than others. Advantage.
To pay attention to a fact, if you want to add the material of the shell class in the resin, be sure to wash! This is a very important condition, so the resin does not generate other strange things over time.
Next, put forward your pendant design and make a pouring frame. It can be made of wire. If the material has excessive ductility (soft or medium soft), please don’t be scared, it will be fixed by the frozen resin, which will make it obviously more tough.
This is used here 0.8 mm gold-plated silver line.
If you are no longer an initiator, please use your precious metal, sterling silver or gold-plated 925 sterling silver line. The framework is made by means of impromptu materials, tools and imagination. Making more frames will be better because the resin has the ability to retain, so it will not waste.
In order to make such a foundation, two lines of the same length are cut in advance. About 14 cm here are here. Bending is right angle.
The production framework is not difficult; if you want a circular or a drop-shaped frame, you only need to wrap the line on a similar object. If you need a right angle, a standard tool, a smooth thin nasal pliers or a sloppy with a smooth jaws will help to manufacture it to avoid damage to the wire coating.
For interface, welding, silver brazing is suitable for use in non-coated wire (silver, brass, copper).
The welding frame size should be identical. If it is not welded, simply put the wires closely, so that there is no gap, the resin will not leak.
Welding frames look perfect and firm. Although this is just a visual effect.
Paste the tape to the working surface (tile, cutting plate or any plane). warn! The viscosity is facing up. Try smoothing tension tape, no waves and skew. Make sure the resin can smooth tape.
Carefully visit the doing frame.
Tip: Do not take them close to each other, the resin may “run out” and the frame will stick together.
For example, the mold is firmly pressed on the tape.
All preparations are best completed in advance. Consider how to place the decorative in the frame, place the sketch onto the paper, which helps place all the content in the correct position because changes the ingredients adhered to the tape are not easy. For accurate applications, use tweezers to minimize contact with the viscous layer and can locate the filler more accurately.
If you make a symmetrical pendant, I suggest you complete one, then complete another. Note that the content in the frame is also symmetrical.
Please note that the resin must start pouring from where you leave until hardened. I hope the surface of the table is horizontal. . The resin can be discharged, overflow the edge of the suspension. If the resin leaks from the frame, wipe the liquid with a cotton swab to absorb the resin. Check your workpiece during the aggregation process. It is perfect when the workpiece is covered by the transparent container, and you can operate according to the process without lifting the cover and discovers the leak in time.
Next, the resin is prepared, and a container having a mixed resin is left for degassing (removal bubble) and a set of viscosities. At this time, it is best to cover the surface with a container such as a billet and a box so that dust, fiber, pet hair, and anything we don’t want to keep in the resin. If your decoration is complicated, the compound is first filled in the case where the compound is still a liquid so that the resin penetrates into all details. After a few hours, when the viscosity of the resin allows you to apply the dome, fill in another layer.
The resin was frozen and the suspension was removed from the viscous tape layer.
On the reverse, is the illuminating sensation like matte? Don’t worry, this is the adhesive layer of the tape. Carefully get rid of it with patient, cotton swab and white wine. Built in a well-ventilated place.
This is easily fixed if the resin is slightly poured in the frame during this process. All resin flows can be taken carefully by means of nail files and sandpaper. Try to be careful not to leave a rough trace on the wireframe.
This is the reverse surface of the wooden frame from the first filler from the tape. There may be a cavity and bubble that fill the resin in the back. The final stage of the filler is a backcoat, so that there is a beautiful transparent lens on both sides. The resin is cultivated according to the instructions. This is no longer necessary to need a transparent tape, I hope to keep the perfect smooth frozen lens.
In most cases, there is no bubble in the good resin. In this case, the resin layer cannot be filled with bubbles. So pendants look more vivid, picturesque.
The highest transparency “water” and charming bubbles rise from the sea.
The last final is to assemble your favorite earrings, everything looks so perfect!
Summer ocean theme drip rubber earrings, 徜徉 徜徉 in blue
So cute little rabbit, actually used it, the finished product made me want to hug home