For knitting handmade sweaters, Alan Flower is a classic style that is always classic. Today, this simple but individual Alan style vest that is told to you is this kind of simple but charming hand -made sweater. The embossed patterns in the middle, with twists on both sides, are soft and warm.
Choose the use of blended wool wires, with softness in fluffy, and the touch is really great, but what I use is not Mimino’s wool, find other wires instead of myself, I look at the style, and the wires I use are also looking for myself like it. of.
Tools: stick needle (No. 8, No. 6)
From the composition, this is a style that does not need to reduce the sleeve hole, just reduce the needle to reduce the needle. The bust is 104 cm. The biggest benefit of this use of needle is that we can adjust the size of the bust through the increase and needle to reduce the needle, without having to affect the patterns that will change much.
From the composition, we can see that this sweater is weaving first, and the hem part is woven down the needle after the main film is completed. The general weaving method is: through the needle method of the needle (I have changed the needle method by myself, it is to use the needle of the needle to start with a hook needle. The advantage of this method is that after solving the other line Inside, there is no obvious trace of needle. If this method does not, the needle method I said by the fingers I said) is still used).
Start with a good hand, combine the needle weaving, and weave it according to the pattern A, Aˊ, and B. Because there is no need to reduce the needle on the sleeve, there is no need to consider the position of the cuff reduction needle. Weaving in the collar nest for reducing needles, 2 stitches and 2 stitches
The method of reducing the needle, 1 needle with 1 stitching of the side of the side of the side.
This sweater only needs to be weaved B. The latter sheet only needs to weave twist patterns, so the workload is not very large. After the current film is completed, pick the specified number of needles at the hem, and weave it down according to the pattern C. The above three pictures are weaving patterns C and pattern B. Reference. When weaving to the end point, a push needle is performed to complete the woven work of the entire clothing.
The stitching of the front and rear body, the method of covering the needle stitching on the shoulders. The threatening is sutured with a sweater to sew. After completing the stitching, pick the specified needle number in the cuffs, weave it according to the pattern C, and the end point is also used
The method of receiving needles. For the treatment of the collar, the ring needle, or the four -6 stick needle, is weaved according to the pattern C into the ring, and the final line is also the method of obtaining needles.
In this way, the work of this hand -edited vest is completed, and finally the steam iron is ironed and fixed, the effect will not be lost in the sweater sold by the clothing store.