Classic crewneck spring dress long sleeve pullover sweatshirt. As long as you choose the fabric decors, it is really super easy to make a piece

What I want to talk to you today is a very classic crewneck pullover sweatshirt.

Styles that have remained unchanged for many years, changing fabrics can show different styles.

Today’s fabric is chosen by Xiaobao. Every time she goes to the fabric market, she will choose a cloth and ask to make one for her, but she didn’t expect that the fabric she chose would eventually be made into her sister’s clothes…

Let’s take a look at the finished product

Very bright colors, I generally choose more plain colors, Xiaobao will choose brightly colored decors every time

But the finished product is still quite beautiful

This is the pre-film effect

Post-film hanging shooting effect

I’ll share a 150-yard crop

SLEEVE CAGE DEPTH CALCULATION FORMULA: B/4-3CM

IF YOU NEED OTHER SIZES, YOU CAN PUSH THE PLATE TO THE APPROPRIATE SIZE ACCORDING TO THE GEAR DIFFERENCE OF CIRCUMFERENCE 4CM, LENGTH 3.5CM, SLEEVE LENGTH 3.5CM, NECKLINE 1CM, AND 1CM SHOULDER WIDTH.

Crop the drawing base

Complete Section

Production process and process explanation:

Fabric selection, knitted sweatshirt fabric, spring wear can choose thin material.

Choose a fabric with a décor and you can use no additional ornaments. If the plain fabric can be decorated with stickers.

The fabric is shrunk before cutting

Knitted fabrics are best washed.

When cutting knitted fabrics, have you ever encountered the phenomenon that the cloth edge is always rolled up. Rador can’t be pulled apart.

Then the best way to deal with it is to wash the fabric and cut it before the fabric is completely dry. A little damp feeling is fine

If the fabric has dried out, you can use a small watering can to spray the fabric evenly

Draw the required paper pattern according to the cropping drawing shared above, and add different seams according to different production processes to cut the fabric

First fold the fabric in half and lay it flat, paying attention to the straight yarn of the fabric not being skewed.

Place the drawn pattern on the flat fabric for typesetting and cutting, making sure that the fabric line is parallel to the straight yarn of the fabric. You can use a tape measure to correct the cloth lines

I used threaded fabric for the neckline, cuffs and hem of this sweatshirt. It’s all folded and cut in half.

If there is no threaded fabric, you can also replace the threaded fabric with its own fabric, and the length of the elastic mouth can be adjusted appropriately according to the elasticity of the fabric

Below are the cut parts and threads

Four-wire machine seam stitching, large side seam, shoulder seam and sleeve bottom seam

The threads are spliced into a circle with a flat car and set aside

The neckline and hem should be marked according to the paper pattern

The cuffs, neckline and hem are fastened to the large body with a flat car, respectively

The neckline marks the collar according to the alignment

All the positions fixed with a flat car are stitched again with a four-wire machine, and the sleeve of the four-wire machine is on.

If you find it difficult to have the upper sleeve, you can first stitch it with a flat car and then stitch it with a four-wire machine

AFTER THE NECKLINE IS STITCHED WITH A FOUR-WIRE MACHINE, YOU CAN USE A FLAT MACHINE ON THE LARGE BODY TO TAKE 0.1CM OPEN THREAD TO FIX THE REVERSE DIRECTION OF THE SEAM.

If you don’t have a four-wire machine at home, you can also sew it with a flat car, but be sure to stitch it with elastic thread, so that the stitched edge will not be easily pulled off.

Well, that’s it for today’s sharing

If you like it, you can try it yourself. If you don’t understand, you can leave a message or private message in the comment area.

Welcome to like and forward, thank you for your encouragement!!!

Classic crewneck spring dress long sleeve pullover sweatshirt. As long as you choose the fabric decors, it is really super easy to make a piece