Fuji Shi Docuncentre S1810 Machine Toner Dump Life Clear Method

The S1810 machine uses the toner cartridge and the powder cartridge separated by the powder cartridge without a chip on the powder cartridge, and the toner cartridge does not have a chip.

This machine uses the main board count to control the life cycle of the drum.

When prompted to replace the photosensitive drum or to the life cycle, you can use the following method to release the prompt:

Entering the repair mode – Press and hold the key (more than five seconds), click “Start” – Tip Enter the password: 6789 – Press the start button – Enter the code 950-807 – Press the start button twice.After turning off the machine, the machine will no longer prompt, and the reset is successful.

Entering the repair mode:

1, press “0” to be not placed, then press “Start”

2, enter 6789, press “Start” to enter the CE mode.

Fuji Shi Docuncentre S1810 Machine Toner Dump Life Clear Method